Specification and Application of Die-Casting Aluminum Alloy A360

Aluminum alloy A360 is an American standard aluminum ingot. Aluminum content: 88 (%), cast aluminum alloy grade: A360

• Material composition

Material composition	Si	Fe	Cu	Mn	Mg	Ni	Zn	Sn	Ti	Remain
Aluminum alloy A360	9.0-10.0	1.3	0.6	0.35	0.40-0.60	0.50	0.50	0.15	0.25	Al

• Mechanical properties

Material	Alloy	Tensile Strength	Yield strength (0.2%)	Shear Strength	Hardness	Elongation	Process
		Mpa	Mpa	Mpa	Brinell(HB)	% in 50mm
Aluminum	A360	317	170	180	75	3.5	Cold Chamber Die castng

• Physical properties

Material	Alloy	Density	Melting Point (Average +/- 50)	Thermal Conductivity	Coefficient of Thermal Expansion	Electrical Conductivity	Process
		g/cm3	°C	W/m K	µm/m°K	%IACS
Aluminum	A360	2.63	577	113	21	29	Cold Chamber Die Casting

• Application: lA360 aluminum alloy This alloy has good forming performance, corrosion resistance, candle resistance, fatigue strength and medium static strength. It can be used to manufacture automobile oil pans, automobile controller shells, motor shells, 5G communication boxes, LED lamp housing and so on.

A360 aluminum alloy aluminum ingot          

 

A360 aluminum alloy die casting

• 

  5 ways for mold maintenance

  1. During mold trial and extrusion:A. Before extrusion, it is necessary to confirm whether the mold temperature meets the requirements and whether there is a core during heating.B. The extrusion die m...
• 

  The Demand of Electric Vehicle for Aluminum Alloy Die Casting Parts

  1. Overview of Electric Vehicle Marketl New energy vehicles are an important direction for the transformation and upgrading of the global automotive industry. As a centralized carrier for the integra...
• 

  Application of aluminum alloy materials in 5G?

  To achieve ultra-high data transmission rate and extremely low network delay, on the one hand, the signal transmission power consumption of 5G AUU (RRU and antenna integrated unit) increases significa...